CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: DAVID CHAMBERS on January 29, 2023, 05:58:01 PM

Title: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: DAVID CHAMBERS on January 29, 2023, 05:58:01 PM

ON MY EARLY 69 NORWOOD CAR (10B) THERE IS ANOTHER T STAMP ON THE FAR PASSENGER SIDE OF THE FIREWALL. HAS ANYONE SEEN ONE LIKE THIS? WHAT WOULD THE SECOND T BE FOR ? ALSO "RED" IS MARKED IN WHITE JUST BELOW THE SECOND T, IS THIS NORMAL ON ALL CARS FOR THE BODY COLOR TO BE MARKED LIKE THIS?  THANKS

Title: Re: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: 169INDY on January 29, 2023, 06:29:17 PM

I might be out to Lunch.
One "T" is for the Trim inspection on the Driver Side of the Car.
Second "T" is for validating the Tag Data to the Build configuration.

My WAG

Title: Re: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: David K on January 29, 2023, 07:32:21 PM

A few pictures would help

Title: Re: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: x66 714 on January 29, 2023, 08:20:16 PM

Colour was under the black paint. I've seen firewall paint thin & it bleeds through. Mine says BYEL, but it wasn't until the firewall was media striped. The PBT I've seen on bothe sides. My car is like that....Joe

Title: Re: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: DAVID CHAMBERS on January 30, 2023, 04:35:54 PM

I will try and send pics but have not done that before.

Title: Re: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: cook_dw on January 30, 2023, 06:04:31 PM

See if this helps.


http://www.camaros.org/forum/index.php?topic=20381.0 (http://www.camaros.org/forum/index.php?topic=20381.0)

Title: Re: BTP SECOND T ON FIREWALL PASSENGER SIDE
Post by: DAVID CHAMBERS on January 31, 2023, 12:40:22 AM

THANK YOU VERY MUCH FOR YOUR HELP.