CRG Discussion Forum
Camaro Research Group Discussion => Originality => Topic started by: tim69camaro on April 14, 2007, 12:31:48 AM
-
Does anyone have a photo of the correct rear engine lift bracket for a 1969 396. I have seen photos of the front bracket and the type which bolts under two of the intake bolts is used. Is the rear the same?
-
(http://216.77.188.54/coDataImages/p/Groups/111/111196/folders/255127/2137556IMG1048.JPG)
The rear is a flat bracket used on BB only.
-
Thank you, the photot is very helpful. I don't have one like that. All the ones I have collected over the years must be from small blocks. I will see what I can find in Charlotte today.