CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: rjprice on September 23, 2021, 01:33:07 AM
-
I have a '69 L48 with cowl induction. I was missing the screw for the coil bracket so I ordered one from a parts house ($7 for a screw). When I got it it was too short.
I have a 270 coil and "a" leaning bracket. Is there more than one leaning bracket? is there more than 1 screw? i.e., doe thes leaning bracket get a different screw?
-
I have a '69 L48 with cowl induction. I was missing the screw for the coil bracket so I ordered one from a parts house ($7 for a screw). When I got it it was too short.
I have a 270 coil and "a" leaning bracket. Is there more than one leaning bracket? is there more than 1 screw? i.e., doe thes leaning bracket get a different screw?
I bet your using an aftermarket coil that may be a little too large? Seen that many times. If you had to spread the bracket apart to make the coil fit - then probably larger than original Delco.
-
I have a '69 L48 with cowl induction. I was missing the screw for the coil bracket so I ordered one from a parts house ($7 for a screw). When I got it it was too short.
I have a 270 coil and "a" leaning bracket. Is there more than one leaning bracket? is there more than 1 screw? i.e., doe thes leaning bracket get a different screw?
I bet your using an aftermarket coil that may be a little too large? Seen that many times. If you had to spread the bracket apart to make the coil fit - then probably larger than original Delco.
It's a "270" coil I got off Ebay. I can measure it. Anyone know the standard diameter of the "270" coil? anyone know the length of the original leaning bracket screw also?
-
I moved this thread from the research topic area since it's not related to the information requested in that particular thread.
Ed
-
GM Coils are appx. 2-1/8" (2.125") Nom.
GM Coil Screw 1-1/2" (1.500")Mon.
AMK Kit 10-24 X 1 1/2 SLOT ROUND CAD. 2 pk, B-10882