CRG Discussion Forum
Camaro Research Group Discussion => Originality => Topic started by: x66 714 on November 12, 2020, 07:34:53 PM
-
Does anybody have the specs on a 9428047? Is it a pop rivet or something else? In the 1969 AIM, it calls for 2 to hold the heater control valve & 2 to hold a bracket to the fender well that holds the main a/c hose. Ref; C60 D6.5 & C60 D5. The currant part is a pop rivet.Thank you, Joe
-
https://www.gmpartsgiant.com/parts/gm-rivet-dom-9428047.html
Description: blind rivet, dome head-
FWIW - blind rivets are typically pop rivets.
-
Search
Semi Tubular Rivets or Hollow-end rivets
Choose; Head style, Material, Diameter and (LG) For Maximum Material Thickness also order a Set tool (Clinch striker) and practice a few strikes and go for it.
Other area used in F Body; Heater Duct Flappers, Ash tray bracket slider, Door channel seal blow out retainers, 68 Grill side mounts etc,,,,,,,
I do not know of ANY pop rivets used in a First Gen
-
Thanks James & Jim. I guess I need to find an 1969 a/c car that hasn't been taken apart...Joe
-
I do not know of ANY pop rivets used in a First Gen
Nor do I, however I do not believe I have ever seen a blind rivet which was set by access to the back.
-
I got an e-mail over night from someone that has an original a/c car that is untouched. I'll see what he sends me & then I'll ask him if I can share...Joe
-
Ill look at mine also.
-
I do not know of ANY pop rivets used in a First Gen
[/quote]
VIN Tag
-
Good Call mike,
Implied but I failed to state:
"I do not know of ANY round head pop rivets used in a First Gen"
Well, Crud I wonder if somewhere else one round pop rivet could be lurking I have forgotten, Interior,,,,inside some sub assy,,,,,,
I am not a Air conditioning guy so It will be interesting to see some photos of AC usage of ???? RIVETS
-
Warren (work in progress) sent me this picture of his unrestored 69 with a/c...Joe
-
Here is mine.
-
Thank you John...Joe