CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: bertfam on January 20, 2019, 05:32:58 PM
-
This isn't Camaro specific, but IS a general question about dying vinyl.
On a really nice gesture, one of the guys on the Tri-5 web site has offered to give me the old seat covers and door panels from his 57 150 2 door sedan. (I have a 57 210 2 door sedan so they'll fit). They're supposedly in good shape (no rips or tears and they look good other than a few minor scuff marks), but they're silver and black (see attached) and I'm looking to go black or dark green. Right now I just have some cheapo aftermarket "stretch" slip-on covers on the front seat and a blanket on the back, so I sure could use them.
Has anyone ever had any success in dying vinyl seat covers and door panels? You can see they're cloth and vinyl, and I don't think I'd have any problems with the cloth parts, but I'm concerned about the vinyl. I've seen vinyl dye, but I've never used it and I'm curious if it actually works. I'm thinking it would just peel off after a while.
So anyone ever dyed vinyl and if so, how did they turn out and did it last?
Thanks
Ed
-
I will also be in a similar situation, just a little more simple in the sense that I want to renew the original finish of some 68 red int parts,, to your point would the SEM plastic adhesion promoter work in this (your) instance?
-
Been using SEM for years with success. Check out their website and full instructional video on YouTube. They also have a tech line you can call. Buy at your local jobber. https://www.youtube.com/watch?v=jYPr7ea_NfY
-
SEM color coat works extremely well for repainting vinyls and you can use it on cloths like velour and carpet also. Make sure you use the correct prep product for vinyl to make sure it has good adhesion and it will last along time. I’ve been in the automotive Paint industry for 40 years and that is the best I’ve ever used.
-
Elliot Knoch (Al Knoch Interiors) says Sems is the best. It actually tattoos the vinyl. I need to find someone who can color match the 69 yellow madrid so I can send Elliot some for my interior...Joe
-
Thanks guys. SEM it is then!
Ed
-
I've used SEM also for changing white door panels to black and had great results. I did use the prep and adhesion promoters.
-
SEM is what I used. But it does make the velour material feel crisp. I used it on my 77 TA Smokey car because the black had faded to gold and replacements were not available. It has been on there a couple years and other than the (feel) it is great.
-
When using Sem Color Coat on velour, cloth seats or carpets to avoid the stiffness or what you referred to as crisp you need to spray it with light coats and use a stiff nylon bristled brush while it is still wet and rub in multiple directions in between each coat
-
I did do something similar to what you described but it still feels like to use a better term like a shirt with heavy starch. It is not a problem you can just "feel" it.