CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: 69 ice cat 8 on December 05, 2018, 10:31:32 PM

Title: Stove Pipe Question
Post by: 69 ice cat 8 on December 05, 2018, 10:31:32 PM

Hello Members,
 Does anyone know is a stove pipe heat riser from a 6 cylinder '68 Camaro will fit a 327-210 hp '68 Camaro?
Thanks in advance.

Title: Re: Stove Pipe Question
Post by: bertfam on December 06, 2018, 12:37:39 AM

I moved your thread from the Site Comments section, but I believe the answer is no. The 6 banger pipe (P/N 3915952) is longer and shaped differently than the LF7 pipe (P/N 3917680).

Ed

Title: Re: Stove Pipe Question
Post by: bcmiller on December 06, 2018, 12:51:17 AM

Do you need one for a 327? Send me a pm.

Title: Re: Stove Pipe Question
Post by: bertfam on December 06, 2018, 01:09:22 AM

Bryon, also note there's a difference between the LF7 pipe (P/N 3917680) and the L30/L48 pipe (P/N 3916309).

Ed

Title: Re: Stove Pipe Question
Post by: bertfam on December 06, 2018, 01:49:08 AM

Hard to tell Bryon.

HERE'S ONE ON EBAY (https://www.ebay.com/itm/NOS-1968-1969-CHEVELLE-NOVA-CAMARO-CARBURETOR-AIR-HEAT-TUBE-3917680-SEE-APPS/163370564014?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649) to compare.

Ed

Title: Re: Stove Pipe Question
Post by: bcmiller on December 06, 2018, 02:29:30 AM

Not sure if this one is for a 1968 base 327 or not. Might be L30 and L48 with automatic trans.

Title: Re: Stove Pipe Question
Post by: bertfam on December 06, 2018, 03:08:42 PM

I don't think yours is the LF7 Bryon. I think yours is the L30/L48 version as you suspect. Here's what the LF7 looks like (see attached). Notice that the end that attaches to the air cleaner doesn't bend up as much as yours.

Ed