CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: 67CruiseMaster on October 26, 2018, 11:14:56 PM

Title: 67 power top brackets
Post by: 67CruiseMaster on October 26, 2018, 11:14:56 PM

Does anyone have their car apart that can show me pictures where the power top cylinder brackets go or how they are mounted? The bracket I am talking about is the upper one that the cylinder attaches to the car.

Title: Re: 67 power top brackets
Post by: 67CruiseMaster on October 28, 2018, 09:30:28 PM

Can someone help with pictures for me? Searched on Google but there aren't any pictures available for what I am looking for

Title: Re: 67 power top brackets
Post by: KevinW on October 29, 2018, 11:17:12 AM

I think all 3 years are the same.

https://www.camaros.net/forums/31-convertibles/456295-convertible-cylinder-bolts.html

(http://www.fototime.com/0203978A19D25C3/standard.jpg)

(http://www.fototime.com/316E75234DDBF5B/standard.jpg)

From right: serrated washer/bolt to hold bracket to body, pivot bolt for ram, bolt assembly for arm going to top assembly

You have these brackets correct?  They are different each side

(http://www.fototime.com/E0EF7AE31840D5C/standard.jpg)

looking in from the top pic

(http://www.fototime.com/567A204AE1E42F6/standard.jpg)

Folding top section from Fisher body manual

http://www.fototime.com/users/kkcamaro@optonline.net/folding%20top%20TC

Hope that helps!

Title: Re: 67 power top brackets
Post by: 67CruiseMaster on October 30, 2018, 01:50:25 AM

I have the brackets. Matter of fact I have 2 right and 1 left. I have a few of the bolts but not the serrated part. Looks like I will have to buy the along with the nylon bushings that go in the end of the cylinder pushrod too. Thanks for the pics Kevin.

Scot