CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: marriest on December 01, 2017, 04:48:29 PM
-
My 69 Camaro brake lights quit working. I checked the switch and it is ok. Turn signals are working. .
Brake light bulbs ok
Running lights are working
Brake lights not working
4 way flashers not working
What does the silver tridon dot 552 do in the fuse block?
Help
Terry
-
Terry, did you check the fuse?
Ed
-
Fuse has continuity but replaced anyway, surprise lights are working. THANKS!
Always suspect the obvious.
Terry
-
The fuse block flasher unit is for the 4-way flashers, there's another unit up under the dash clipped to the support rib that does the turn signals.
-
Each circuit has its own power from fuse panel.
Brake lights goes through turn signal switch, so you might pull back on t/s handle as this action may make contact in T/S switch as bushing may be worn out due to weight of steel handle.
But, I would wager if you get emergency lights working first, brake lights will work.