CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: bcmiller on October 10, 2017, 10:49:19 PM
-
Sorry for the inconvenience but things are back to normal now!!!
-
.. sitting in front of my computer.. just 'aposting'... :) Now, if people would wander back in here and throw some 'Camaro stuff' at us.... :)
-
Glad to see the forum back!
-
Me Too! :) but while CRG has been down/gone/? .... I've helped my next door neighbor build a 24x30 garage in their backyard, and also ordered, received and installed at 2-post lift in my garage. This two post lift is going to be primarily for removing my Nomad body from the original chassis and sitting it back down on a new custom chassis from Corvette Corrections (Seguin, TX). To make this Camaro related, I installed a Camaro engine/trans in the new chassis (2002 LS1/4L60)... :)
-
Thanks to those who obviously put in a lot of hard work to get the forum operational again!
-
Thanks to those who obviously put in a lot of hard work to get the forum operational again!
Ditto! Thanks, folks.
-
Glad to have you back...Joe
-
Glad the site is back up!! Thanks to the guys that put in all the hard work.
-
Glad the forum is back! 😁
-
About to turn blue waiting. Thanks to all!
-
We may never know what exactly happened, but thanks to the tireless work of those who restored the site. Withdrawal was severe and rough!
-
Thanks for getting the site back up!
-
Ok so Gary has been busy!
I sold 3 project cars and some parts (but bought a few more parts because of great prices). Overall, downsizing. Kinda looking for a big block or Z project car, but thats off the record! It’s not a want ad!
How about the rest of you?
-
Glad the forum is back up. I missed you guys and your cars.
-
Thanks for getting back on line! I was having withdrawals, CRG is my escape when I'm stuck in the office at work, Camaro fever is very therapeutic !
-
Thanks for the hard work to get us back up. My fingers would automatically start trying to check in every day. I had to slap my hand a few times and so no. :o
-
nice to see the forum back in action, I didn`t realize how often I went to it. great to see it back up and running again!!!!!!
-
Ok so Gary has been busy!
I sold 3 project cars and some parts (but bought a few more parts because of great prices). Overall, downsizing. Kinda looking for a big block or Z project car, but thats off the record! It’s not a want ad!
How about the rest of you?
I bought a Mopar because this site was down!!! My first non GM car 😁. AAR Cuda...
-
Nice Steve, nice. :)
The only car that ever beat my dad’s old 68 Z28, was an AAR Cuda. Plum crazy purple, slicks. He lost by half a fender. :(
-
Kurt and Doug did all the hard work!
-
Thanks Kurt and Doug!
I keep waiting to hear that the forum is kept running by a 20 year timer that ran out at the end of September and it took Kurt and Doug a week and a half to rewind it. :)
(as if it were that simple)
-
Yes, MANY Thanks to Kurt, Doug, and everyone else who 'began' this forum, helps to keep it going, and of course worked to get it 'back up'... We ALL appreciate your efforts a thousand fold!
-
Ok so Gary has been busy!
I sold 3 project cars and some parts (but bought a few more parts because of great prices). Overall, downsizing. Kinda looking for a big block or Z project car, but thats off the record! It’s not a want ad!
How about the rest of you?
I bought a Mopar because this site was down!!! My first non GM car 😁. AAR Cuda...
Steve, being in CRG withdrawal is a bad thing, but at least you bought a nice alternative.. :) I really like the AARs and TA cars... in fact, I almost bought a new one in 1970, and helped a friend of mine find and restore one of each... Orange/black TA and an orange AAR (with auto and bench seat).. :)
Here are photos ... coming out of my homemade paintbooth, and finished in the 2nd photo...
Steve: What color/options for the AAR you purchased? :)
-
Gary that Cuda might have turned out really nice,
If it wasn't orange... :P
Is that the only color you spray out there? ;D
-
Gary that Cuda might have turned out really nice,
If it wasn't orange... :P
Is that the only color you spray out there? ;D
Nope, and that was the only Orange ever sprayed in that booth... and it was HEMI Orange (not nearly as pretty or fast as 'Hugger Orange'.. you know HO... :)
But I do need to repaint my hugger orange hood some day soon...
-
Ok so Gary has been busy!
I sold 3 project cars and some parts (but bought a few more parts because of great prices). Overall, downsizing. Kinda looking for a big block or Z project car, but thats off the record! It’s not a want ad!
How about the rest of you?
I bought a Mopar because this site was down!!! My first non GM car 😁. AAR Cuda...
Steve, being in CRG withdrawal is a bad thing, but at least you bought a nice alternative.. :) I really like the AARs and TA cars... in fact, I almost bought a new one in 1970, and helped a friend of mine find and restore one of each... Orange/black TA and an orange AAR (with auto and bench seat).. :)
Here are photos ... coming out of my homemade paintbooth, and finished in the 2nd photo...
Steve: What color/options for the AAR you purchased? :)
Gary the car is red-red 4spd. Being Trans Am cousin to the Z i've always liked them. They are very unique car with a lot of cool features.
-
A 70 Cuda is on my list. Nice purchase Steve. Like to see some pics in the garage thread about it.
-
Kudos to everyone involved in getting the forums back up. ;)
-
Ok so Gary has been busy!
I sold 3 project cars and some parts (but bought a few more parts because of great prices). Overall, downsizing. Kinda looking for a big block or Z project car, but thats off the record! It’s not a want ad!
How about the rest of you?
I bought a Mopar because this site was down!!! My first non GM car 😁. AAR Cuda...
Steve, being in CRG withdrawal is a bad thing, but at least you bought a nice alternative.. :) I really like the AARs and TA cars... in fact, I almost bought a new one in 1970, and helped a friend of mine find and restore one of each... Orange/black TA and an orange AAR (with auto and bench seat).. :)
Here are photos ... coming out of my homemade paintbooth, and finished in the 2nd photo...
Steve: What color/options for the AAR you purchased? :)
Gary the car is red-red 4spd. Being Trans Am cousin to the Z i've always liked them. They are very unique car with a lot of cool features.
if I recall correctly.... 'Tor-Red'.... :) ?
-
Ok so Gary has been busy!
I sold 3 project cars and some parts (but bought a few more parts because of great prices). Overall, downsizing. Kinda looking for a big block or Z project car, but thats off the record! It’s not a want ad!
How about the rest of you?
I bought a Mopar because this site was down!!! My first non GM car 😁. AAR Cuda...
Steve, being in CRG withdrawal is a bad thing, but at least you bought a nice alternative.. :) I really like the AARs and TA cars... in fact, I almost bought a new one in 1970, and helped a friend of mine find and restore one of each... Orange/black TA and an orange AAR (with auto and bench seat).. :)
Here are photos ... coming out of my homemade paintbooth, and finished in the 2nd photo...
Steve: What color/options for the AAR you purchased? :)
Gary the car is red-red 4spd. Being Trans Am cousin to the Z i've always liked them. They are very unique car with a lot of cool features.
if I recall correctly.... 'Tor-Red'.... :) ?
Yep
-
And I still don't understand what changed to crash the forum. Something with the host presumably....
-
I appreciate all the work you guys do to keep us informed!
-
It`s gotta be hard to keep all the quirks out of the site...I just got back into the car to document mine and thought jeez another set back..