CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: Tx-Z 302 on June 20, 2017, 09:43:29 PM

Title: Small block oil splash shield
Post by: Tx-Z 302 on June 20, 2017, 09:43:29 PM

Anyone have a ssource on oils splash shield and the rivets ? For small block intake. Thx

Title: Re: Small block oil splash shield
Post by: bertfam on June 20, 2017, 09:49:11 PM

Which casting number? There are a lot of differences between them.

Ed

Title: Re: Small block oil splash shield
Post by: jack92584 on June 20, 2017, 11:43:40 PM

Cant help with the splash shield, but heres your rivets
http://www.ebay.com/itm/GM-NOS-10229247-3959544-4-55-81-Chevy-Camaro-CORVETTE-Manifold-Rivet-409-427/282254516935?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Title: Re: Small block oil splash shield
Post by: 68Zproject on June 21, 2017, 03:14:29 AM

This one if it's correct, comes with the rivets.

http://www.ebay.com/itm/Aluminum-intake-manifold-heat-shield-Corvette-LT1-Camaro-Z28-New-3758369-guard-/132233905533?hash=item1ec9c1457d:g:IfUAAOSwq1JZEiGR&vxp=mtr

Title: Re: Small block oil splash shield
Post by: Tx-Z 302 on June 22, 2017, 08:12:14 PM

Tha is for the info.  Ed it's the 610 z intake?  I thought they (small blocks) were all the same. I learn everyday on here :)

Title: Re: Small block oil splash shield
Post by: bertfam on June 22, 2017, 08:44:47 PM

No, there are several. Mostly for cast iron, but even the aluminum have a few different ones.

Anyway, the 1967 & 1968 302 3917610 guard isn't listed in the P&A, but the 3932472 is (1969 302), and that one uses the 3758369 GUARD (http://www.ebay.com/itm/Aluminum-intake-manifold-heat-shield-Corvette-LT1-Camaro-Z28-New-3758369-guard-/132233905533?hash=item1ec9c1457d:g:IfUAAOSwq1JZEiGR&vxp=mtr). I would assume the 3917610 uses the same guard, but again, it's not listed so I can't say for sure. Maybe Jerry can verify this since he probably has a million of these manifolds stashed in his office!

Ed

Title: Re: Small block oil splash shield
Post by: 1968RSZ28 on June 22, 2017, 11:05:20 PM

In the eBay link Ed provided above, the seller (ggordog) states in the listing description...

"This will fit all small block Winters casted Chevy aluminum manifolds from 1962 on."

Paul