CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: Jody on March 09, 2017, 06:24:20 PM

Title: Big Block heater box cover
Post by: Jody on March 09, 2017, 06:24:20 PM

Does anyone have photos, or tell me where I can find them, of the correct screws that attach the bracket where the heater hoses goes into the firewall through the cover?

Thank you,

Jody

Title: Re: Big Block heater box cover
Post by: bertfam on March 09, 2017, 07:03:16 PM

Jody, going by your previous posts you have a 69, correct? If so, the bracket screws (number 10 in the drawing below) are P/N 9419321 and you can get them from AMK (http://amkproducts.com/Catalog_PDF.htm).

Ed

Title: Re: Big Block heater box cover
Post by: Jody on March 10, 2017, 04:27:04 PM

Yes, I have a 1969 Camaro with a big block.  Thanks for helping.  Someone replaced mine with regular screws.

Jody

Title: Re: Big Block heater box cover
Post by: HawkX66 on March 14, 2017, 04:11:48 PM

Here are mine, before and after. Sorry they aren't closer...

(https://c1.staticflickr.com/1/672/32425708122_188bbc5580.jpg) (https://flic.kr/p/Rpmek9)

(https://c1.staticflickr.com/1/346/32199588280_e133ce3d9d.jpg) (https://flic.kr/p/R4niMb)

I believe these are the same if I remember right:

(https://c1.staticflickr.com/1/582/32425837492_4b79ff5a97.jpg) (https://flic.kr/p/RpmTME)

Title: Re: Big Block heater box cover
Post by: william on March 14, 2017, 05:21:10 PM

Same 9419321 screw is used to fasten the dimmer switch to the floor pan.

Title: Re: Big Block heater box cover
Post by: HawkX66 on March 14, 2017, 06:27:28 PM

Quote from: william on March 14, 2017, 05:21:10 PM

Same 9419321 screw is used to fasten the dimmer switch to the floor pan.

Are you sure William? They seem awfully short for that. I have one original dimmer switch screw for my 69 and I was looking for the second one.

Title: Re: Big Block heater box cover
Post by: bertfam on March 14, 2017, 07:25:55 PM

Quote

Are you sure William? They seem awfully short for that. I have one original dimmer switch screw for my 69 and I was looking for the second one.

Yep. Dave, take a look at your AIM, UPC 12, Sheet B6, item 1 and you'll see it's the same screw.

That screw was used in a TON of places on multiple models and multiple GM divisions, so it's fairly common.

Ed

Title: Re: Big Block heater box cover
Post by: HawkX66 on March 14, 2017, 07:35:06 PM

Quote from: bertfam on March 14, 2017, 07:25:55 PM

Quote

Are you sure William? They seem awfully short for that. I have one original dimmer switch screw for my 69 and I was looking for the second one.

Yep. Dave, take a look at your AIM, UPC 12, Sheet B6, item 1 and you'll see it's the same screw.

That screw was used in a TON of places on multiple models and multiple GM divisions, so it's fairly common.

Ed

Well alrighty then. I'll take a look. Thanks.