CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: Terry69RSZ28 on April 23, 2016, 03:01:20 PM

Title: 69 Bumper Jack
Post by: Terry69RSZ28 on April 23, 2016, 03:01:20 PM

Hi Everyone,
I have a 03E Build Date with January, 1969 YH wheels. Should I have a 9A, 9B or 9C jack?
Thanks, Terry

Title: Re: 69 Bumper Jack
Post by: 6667ss138 on April 23, 2016, 07:22:39 PM

JMO, I think all three would be acceptable but I would look for a 9C if it were me.

Title: Re: 69 Bumper Jack
Post by: MO on April 24, 2016, 03:07:19 AM

I think 9C would be the best choice.

Title: Re: 69 Bumper Jack
Post by: Terry69RSZ28 on April 24, 2016, 01:55:25 PM

Thanks for the input as I will look for a 9C jack.
Terry

Title: Re: 69 Bumper Jack
Post by: ZLP955 on April 25, 2016, 07:05:27 AM

Terry was your car assembled at NOR or LOS/VN?

Title: Re: 69 Bumper Jack
Post by: Terry69RSZ28 on April 25, 2016, 01:22:27 PM

It was assembled at Norwood.

Title: Re: 69 Bumper Jack
Post by: ZLP955 on April 26, 2016, 11:25:56 AM

Quote from: Terry69RSZ28 on April 25, 2016, 01:22:27 PM

It was assembled at Norwood.

Thanks. LOS cars may have used a different design, whereas all NOR cars seem to have the trapezoidal mast style with the date code stamped on the mechanism rivet.

Title: Re: 69 Bumper Jack
Post by: 69 Zee on May 08, 2016, 03:37:28 AM

Quote from: 6667ss138 on April 23, 2016, 07:22:39 PM

JMO, I think all three would be acceptable but I would look for a 9C if it were me.

Agree with Len, The closer the better.  9A might be a bit of a stretch but possible.  My 03B NOR build has a 9C jack

Title: Re: 69 Bumper Jack
Post by: Terry69RSZ28 on May 10, 2016, 02:14:47 AM

Hi,
I found a 9C jack for my car.  :)