CRG Discussion Forum
Camaro Research Group Discussion => Originality => Topic started by: BillOhio on March 28, 2016, 01:38:40 AM
-
I am trying to find new tags for my springs and the first set I bought are too narrow. Mine are an inch wide on an 03D car. The ones I bought were copied off an original set. If you have your originals, how wide and when was your car built?
-
Bill,
I have my originals, but when I removed the original springs, I removed the tags, placed them in a plastic bag and 'stored them' away... :).... It would probably take me 2 hrs or more to locate them. :(
PS. the new ones you posted photos of, appeared too narrow to me... your originals appeared to be similar to mine (late 09C car)...
-
Bill,
On my '67 04B the front spring tags are 1" wide
YJ 3912532
Mike
-
Hi Gary
I bet your tags are with the brake line I have spent 2 days looking for!!
-
Hi Gary
I bet your tags are with the brake line I have spent 2 days looking for!!
:) No, I think your parts are in Warehouse B.. and mine are in Warehouse G.. :)
-
I would contact Don Lightfoot and see what he can do for you Bill, even you too Gary. That is, making correct tags, not finding your lost parts.lol http://www.angelfire.com/rock/69ss/
-
Or ECS maybe, the makers of RPM? They are supposed to make exact copies.
http://www.ecsautomotive.com/productdesc.php?co=g&id=5
Mike
-
I would contact Don Lightfoot and see what he can do for you Bill, even you too Gary. That is, making correct tags, not finding your lost parts.lol http://www.angelfire.com/rock/69ss/
Mine aren't lost... they are simply 'put up'... :)
-
Mine are put up too!
this tag came from Don
-
These are the front and rear spring tags from my 1968 04A. Both are 1" wide.
-
the rear ones I got were the same width as the narrow front ones so they both must be wrong. Thank you for the pictures. unreal you were able to find the rear ones!
-
I had Don make my spring tags. My original front tags were 15/16" wide, 3955712 EM. He had no problem making the right size, but font is where we had a problem. The 'M' on the original tag looks like an upside down 'W'. I finally found the proper font and what he made was an exact match. Excellent job!! :)
-
my originals are an inch and the new ones 7/8