CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: Danzo on February 21, 2016, 02:54:23 AM

Title: 69 power steering hose sleeves
Post by: Danzo on February 21, 2016, 02:54:23 AM

Has anyone found a good replacement for these sleeves? Thanks in advance.

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 21, 2016, 02:37:14 PM

I am working on getting some made. I should have a few test pieces in a week or so.

Scott

Title: Re: 69 power steering hose sleeves
Post by: 169INDY on February 21, 2016, 03:22:17 PM

I used armaflex pipe insulation I will have to look in my notes for a part number.

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 21, 2016, 03:29:32 PM

I looked into armaflex too, but it is to thick IMHO. I want something closer to original.

Title: Re: 69 power steering hose sleeves
Post by: 169INDY on February 21, 2016, 04:07:24 PM

What is the thickness of the Original, both of my power steering cars had soaked, crumbling orig insulation that was nasty and have since been replaced.

Title: Re: 69 power steering hose sleeves
Post by: ko-lek-tor on February 21, 2016, 05:42:07 PM

I would like to confirm, maybe through some of our sites survivor cars the answer lies, but did both hoses get a sleeve? My car has a sleeve only on the pressure hose. This is a 69 specific question,BTW.

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 21, 2016, 07:33:44 PM

Bentley, could you send me a pic of your p/s hose? Maybe measure the length? The sleeve on mine is about 10 inches but the return looks to be a replacement so I have no idea if it has/needs one.

Scott

Title: Re: 69 power steering hose sleeves
Post by: Danzo on February 21, 2016, 08:09:32 PM

Both must have had them as I only have one remaining on the return hose.

Title: Re: 69 power steering hose sleeves
Post by: Camarocards on February 22, 2016, 12:13:26 AM

I seem to recall someone using the sleeve that Mustangs used. I have no clue whether or not it's correct or even close but thought I would share nonetheless.

http://www.cjponyparts.com/power-steering-hose-protector-sleeve-20/p/PSHPS/

Bob

Title: Re: 69 power steering hose sleeves
Post by: Boston14 on February 23, 2016, 02:50:29 PM

I found a replacement hose cover, and they look pretty good, matched original covers really well.  I found them at Virginia Classic Mustang.com

http://www.virginiaclassicmustang.com/Search.aspx?k=SU1181.
Here's a picture before drivetrain was installed. 

Title: Re: 69 power steering hose sleeves
Post by: Boston14 on February 23, 2016, 02:54:40 PM

And yes both of my original hoses had covers on them though badly deteriorated.

Title: Re: 69 power steering hose sleeves
Post by: Rich69s on February 25, 2016, 02:54:26 AM

Thanks ,I just ordered 2 hoses from virginamustang and there was on shipping on my order!

Title: Re: 69 power steering hose sleeves
Post by: X33RS on February 25, 2016, 03:40:37 AM

I usually get them from NPD.  Comes in a 20" length for same price $19.95, you just cut in in half and good to go.   NPD calls them a sleeve, part number 3B713-1A

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 25, 2016, 11:15:14 PM

I just got my test pieces in. We just installed on a new hose. I think it looks really good!

(http://i1300.photobucket.com/albums/ag94/spooky427/20160225_175922_zpsjrfq8cpb.jpg) (http://s1300.photobucket.com/user/spooky427/media/20160225_175922_zpsjrfq8cpb.jpg.html)

(http://i1300.photobucket.com/albums/ag94/spooky427/20160225_175742_zpswpilfibd.jpg) (http://s1300.photobucket.com/user/spooky427/media/20160225_175742_zpswpilfibd.jpg.html)

(http://i1300.photobucket.com/albums/ag94/spooky427/20160225_175435_zpskrnxvsma.jpg) (http://s1300.photobucket.com/user/spooky427/media/20160225_175435_zpskrnxvsma.jpg.html)

what do you guys think?

Scott

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 25, 2016, 11:22:30 PM

(http://i1300.photobucket.com/albums/ag94/spooky427/20160225_175827_zps5y2s0wkx.jpg) (http://s1300.photobucket.com/user/spooky427/media/20160225_175827_zps5y2s0wkx.jpg.html)

Title: Re: 69 power steering hose sleeves
Post by: Danzo on February 26, 2016, 01:48:31 AM

Looks really good! How long is the one on your high pressure hose? The original one I have on the return hose is 6".
Thanks.

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 26, 2016, 02:36:02 AM

it is 10.5 inches. it looks super close to original. it is on there snug. i'm glad it fit over the crimped on fittings and sits on the hose not being loose. the return will be even easier not having to go over fittings. I would love to know the OD of the pressure and return lines from gm.

Scott

Title: Re: 69 power steering hose sleeves
Post by: Spooky on February 28, 2016, 03:35:10 PM

check my posting in the originality section please

Title: Re: 69 power steering hose sleeves
Post by: sixt9x33rs on March 02, 2016, 12:17:27 PM

Quote from: Spooky on February 21, 2016, 03:29:32 PM

I looked into armaflex too, but it is to thick IMHO. I want something closer to original.

That is what I used and I agree too thick. Need to install what you guys found. Anyone have pictures of the NPD product?