CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: BillOhio on November 17, 2015, 03:39:05 AM

Title: smog pump bracket to block bolts
Post by: BillOhio on November 17, 2015, 03:39:05 AM

My block still had the original bolts in it and I took them out and now I cant find them!!  Does anyone have any record of what went in there ? I looked the AIM over pretty good and didnt find them in there either. They are the two that might be 3/8 by an inch

Title: Re: smog pump bracket to block bolts
Post by: copo on November 17, 2015, 07:02:47 PM

The bolts are shown in the AIM as # 9418822 which are 3/8 NC X 1'' long.

Title: Re: smog pump bracket to block bolts
Post by: BillOhio on November 17, 2015, 10:55:17 PM

thank you. I have looked thru it to find them and never did. wonderful

Title: Re: smog pump bracket to block bolts
Post by: BillOhio on November 18, 2015, 01:43:06 AM

I thought I should be able to find it if its in the AIM.  What I found tonight was on page KD1, view b, shows a non smog motor with the bolt part number 9419051. It looks like at the bottom this was changed but mine isnt a good copy and I can only make out the last 2 numbers of 29.  I looked some more and I am not sure how I missed the actual page that shows how the pump is mounted. Plain as day.