CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: ko-lek-tor on August 22, 2015, 12:39:29 AM

Title: 350-300hp Valve Covers
Post by: ko-lek-tor on August 22, 2015, 12:39:29 AM
Found a couple sets of 69 350-300hp covers in the "stash". Just in case someone needs to see any features, I took a few pics. These are in their original Tonawanda paint, BTW.
pic of Each Decal. and just the passenger side covers without a thorough cleaning.
Title: Re: 350-300hp Valve Covers
Post by: crobjones2 on August 22, 2015, 02:59:34 AM
would you please take a picture of the hose that goes to the air cleaner.
Thank you
Title: Re: 350-300hp Valve Covers
Post by: 2timms on August 22, 2015, 02:58:15 PM
I'm not seeing the oil filler cap on the left valve cover that should be there. Aren't these earlier than 69? 
Title: Re: 350-300hp Valve Covers
Post by: ko-lek-tor on August 22, 2015, 04:23:32 PM
I'm not seeing the oil filler cap on the left valve cover that should be there. Aren't these earlier than 69? 

"Found a couple sets of 69 350-300hp covers in the "stash". Just in case someone needs to see any features, I took a few pics. These are in their original Tonawanda paint, BTW.
pic of Each Decal. and just the passenger side covers without a thorough cleaning."

Please, thoroughly read.

Title: Re: 350-300hp Valve Covers
Post by: 2timms on August 22, 2015, 06:24:38 PM
Ah Ha,

now it all comes clear.  ;)
Title: Re: 350-300hp Valve Covers
Post by: ko-lek-tor on August 23, 2015, 02:12:42 AM
would you please take a picture of the hose that goes to the air cleaner.
Thank you

I am not for certain on this, Chris, but this was in the pile of L48 Blue Car engine pieces.
Title: Re: 350-300hp Valve Covers
Post by: abiddle on October 13, 2015, 07:36:15 PM
Does anyone know where I can purchase a reproduction of this crankcase vent hose? AIM part number 3942524, but I haven't found an equivalent part in any parts catalog.
Title: Re: 350-300hp Valve Covers
Post by: 1968RSZ28 on June 11, 2017, 10:52:10 PM
Does anyone know where I can purchase a reproduction of this crankcase vent hose? AIM part number 3942524, but I haven't found an equivalent part in any parts catalog.

Andy - I don't know if you still need this hose, but here's a NOS one up for bids...

http://www.ebay.com/itm/NOS-GM-3942524-Air-Cleaner-Hose-1968-1969-Camaro-with-327-or-350/122543624031?_trksid=p2060778.c100290.m3507&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3D67a7881e14564223ae1839a2fa5de19f%26pid%3D100290%26rk%3D1%26rkt%3D4%26sd%3D122543624031

Paul
Title: Re: 350-300hp Valve Covers
Post by: abiddle on June 12, 2017, 02:32:42 PM
Thank you, this is a nice hose.
Title: Re: 350-300hp Valve Covers
Post by: BillG on June 14, 2017, 07:08:03 PM
Thanks Bentley.