CRG Discussion Forum
Camaro Research Group Discussion => Maintenance => Topic started by: mikefam on April 27, 2015, 10:29:51 PM
-
I converted my 68 Camaro to a 3 speed TH350 transmission and am having trouble finding a seal for where the detent/kickdown cable enters the transmission body. I have read that there is a tophat shaped seal that will work but I can't find it online and the seal that NAPA came up with was too large. The seal that I need will have a 5/16" inside diameter to fit the cable housing.
TIA, Mike.
-
OK I identified the seal that I need but am having trouble finding one locally now. Here's a link for anyone that is interested
http://www.kakapart.com/parts/gm-1262475.html
Mike.
-
Correction from my first post - the inside diameter of the seal is 3/8" and not 5/16".