CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: mls68z28 on March 07, 2015, 10:43:43 PM
-
http://harrisburg.craigslist.org/pts/4921813629.html
-
Not 100% clear if the $1800 asking price is for the block, 1178 crank and pistons/rods (how many?), or just the block. Might even be a Tonawanda block.
-
The add states 302 short block which would indicate that the rotating assembly is included in the price. Still would want more detail about the parts.
-
The add states 302 short block
Agreed. But the wording is not totally clear, and only the block features in the ad photos. I've contacted a number of sellers in the past only to find they think a "short" block means "bare" block.
So I would also not assume seller has 8 pistons and 8 rods too.
-
It is a complete short block
-
It is a complete short block
Are you the seller?
-
The seller states, sold as a package, not going to separate.I would think it's for all the parts.
-
'short block' to me indicates that it's an 'assembled' short block, with all internal parts, minus the heads and intake, and other peripherals.
If it's a short block, it is as assembled from the factory (with usage and age?), or is it a newly assembled (rebuilt) short block?
If it's not assembled, then he has the 'parts to assemble a short block'...
-
Yes it is mine. I have not rebuilt it allowing the purchaser the opportunity to use the machine shop of their choice to do the work. I know what it is like buying a used, rebuilt, engine. This is a shortblock as I have known them to be sold. It is completely disassembled. Long blocks come with the heads,oil pans and usually timing covers. I do not have those parts. I have an extra windage tray but no studs. I have access to two bare cylinder heads but not matching. The price is negotiable but as stated in my add I am not looking to separate it only unless some wanted the block. Someone contacted me about the crank. I have two cranks and they are not hard to get. I have a 68 and have an engine for it. When I put the add on, I was at work and only had access to pictures of the block. I wanted to check the crank and see what it measured at. I never thought someone on here would pick up the add and run with it. Someone in my area had a wanted add for an engine so I thought I would put it on. Check the ad again. I have more pictures of the parts