CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: paulmanta on August 22, 2014, 05:46:41 PM

Title: Correct bolts for seat rails to seats
Post by: paulmanta on August 22, 2014, 05:46:41 PM

HI All,

I have a mountain of old bolts here that I am working my way through and restoring.  I am now at the seat rail to seat bolts and I cannot find 8 the same (4 each seat).

Can anyone tell me or post is pic up of what the seat rail to seat bolts look like please ? or post a pic ?

I think they have a large washer on with little teeth under the washer because the rail has tiny marks in a circle where the bolts go but I am not sure because of the 8 only some bolt holes have the marks.

Title: Re: Correct bolts for seat rails to seats
Post by: Mike S on August 23, 2014, 12:54:15 AM

There are a lot of bolts pictured here from a well participated discussion:
http://www.camaros.org/forum/index.php?topic=9074.15
Look at reply #28 for seat bolts. Keep in mind that the head markings can vary depending on the mfg, but for seats I have always seen the washers with the barbs in the edges.

Mike

Title: Re: Correct bolts for seat rails to seats
Post by: paulmanta on August 23, 2014, 08:30:54 AM

HI Mike,

Thanks for that, I have those exact ones restored to fit the seats to the floor, can I take it that the same ones are used to hold the sliders tot he seat then ?  That would make sense as I have a 4 spare bolts like that and when I got the car one of the seats was not bolted in and the rails were missing.