CRG Discussion Forum
Camaro Research Group Discussion => Originality => Topic started by: 6667ss138 on December 21, 2013, 05:30:29 PM
-
I have passed on a car that I was looking at that had a rusty dash repaired. I am now looking at a Z/11 Pace car, small block, automatic. I will be going to give it a real good inspection next weekend weather permitting. I owned and restored one back in the 90's but might need a refresher course from some of you 69 pace car guys, if you would please.
I know where to check for all the engine numbers but need to find out what the correct casting numbers and heads numbers etc. should be.
Where do I look on the turbo 350 automatic trans for numbers that would match the POP and VIN?
I will take a lot of pictures that I could post for opinions as well later.
Thanks and Merry Christmas
-
Just to add. I have read all the info on Z/11's here on the site to help refresh me and have looked for past threads on CRG as well as TC but didn't find much, unless someone knows of some links that I'm just not seeing.
According to the POP the rear is supposed to be BR 0306G which i have decoded and the trans Y9C03 if I'm reading my handwriting correctly :)
Thanks again!
-
This is a pretty site dedicated to pace cars: http://camaropacecars.com/
Mike
-
Thanks Mike, I'll go there to read right now.
-
Lots of good information here... http://www.camaros.org/drivetrain.shtml
Paul
-
Lots of good information here... http://www.camaros.org/drivetrain.shtml
Paul
Ok, I see the turbo 350 trans areas to look at for the VIN and on the pan for the POP code. One just has to hope the pan hasn't been changed.
Thanks Paul!
-
The trans should have the VIN derivative on the left top upper flange at the very rear edge of the point where the engine and the trans is bolted together.
-
I hope it isn't this one....
-
Ouch!! Hate to see that. No its not that one.