CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: camaroman1969 on November 29, 2013, 01:22:21 AM

Title: 1968 Camaro rear spoiler part # (short spoiler)
Post by: camaroman1969 on November 29, 2013, 01:22:21 AM
Hi Guys!  Would anyone know or have handy by chance, the part number for a 1968 Camaro rear spoiler.  I have the 69 number
which is: GM# 3949798. (long spoiler)  The 68s had the short spoiler.  thanks!    Don
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: WorkinProgress on November 29, 2013, 01:53:55 AM
Don, the part number is 3916633 Group 12.181. GM parts book calls it an extension assembly.

                                                                        - Warren
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 68Zproject on November 29, 2013, 01:54:51 AM


View Profile Email Personal Message (Online)
   
   
Re: D 80 in AIM?
Reply #9 on: May 30, 2009, 10:14:01 AM
   Reply with quote
3916633
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: camaroman1969 on November 30, 2013, 03:13:49 AM
Thanks Guys for the fast reply and the correct part number.    Don
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 68Zproject on November 30, 2013, 07:07:39 AM
Are you looking for one?
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 1968RSZ28 on November 30, 2013, 07:47:45 PM
Are you looking for one?

If you are, GM still sells them.

Paul
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 69Z28-RS on December 01, 2013, 01:17:11 AM
Are you looking for one?
If you are, GM still sells them.
Paul

Does GM still offer the '69 (later) spoiler and hardware as well?  same design?
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: camaroman1969 on December 01, 2013, 02:15:52 AM
Can these be ordered directly from a GM dealership??  thanks!  Don
Are you looking for one?

If you are, GM still sells them.

Paul
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 1968RSZ28 on December 01, 2013, 03:23:24 AM
Does GM still offer the '69 (later) spoiler and hardware as well?  same design?

No.

Paul
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 1968RSZ28 on December 01, 2013, 03:29:40 AM
Can these be ordered directly from a GM dealership??  thanks!  Don

Don,

Yes, the '68 spoiler (3916633) is still available from GM.

Paul
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: camaroman1969 on December 02, 2013, 03:44:42 AM
Thanks Paul!
Can these be ordered directly from a GM dealership??  thanks!  Don
Thank you much Paul!!!  Don


Yes, the '68 spoiler (3916633) is still available from GM.

Paul
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: Mark on December 02, 2013, 11:55:18 AM
They don't come with hardware though.
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 69Z28-RS on December 02, 2013, 02:36:17 PM
by 'hardware'..  I assume you mean the washer/rubber/nuts?   but the studs ARE installed in the spoiler from the factory?
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: rare396bronze on December 03, 2013, 04:53:32 AM
Sorry guys just checked on 68 spoiler while at work today is no longer available!
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: bertfam on December 03, 2013, 02:31:58 PM
GMPARTSDIRECT (http://www.gmpartsdirect.com/) shows P/N 3916633 is still available for $266.47 plus shipping.

Ed
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: jdv69z on December 03, 2013, 02:47:12 PM
I went as far as checkout on that site. Shipping was like $145.00?? Stopped me in my tracks!
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: bertfam on December 03, 2013, 03:35:38 PM
Yes, GMPartsDirect has cheap prices on their parts, but they make it up on the "shipping and handling"!!

Or, you can go the EBAY ROUTE (http://www.ebay.com/itm/NOS-CHEVY-CAMARO-Z-28-SS-RS-67-68-GENUINE-GM-TRUNK-LID-REAR-SPOILER-EXTENSION-/300920326651?pt=Motors_Car_Truck_Parts_Accessories&hash=item46103fc9fb&vxp=mtr#ht_1093wt_1363) and pay $375 and no shipping.

Ed
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: Mark on December 03, 2013, 03:46:54 PM
by 'hardware'..  I assume you mean the washer/rubber/nuts?   but the studs ARE installed in the spoiler from the factory?

Are you talking about a hunk of 1/4"-20 threaded rod, or the original double ended studs with a lag thread on one end, and 1/4-20 on the other with the integral step between them.  The ones I've seen have threaded rod only.
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: 69Z28-RS on December 03, 2013, 04:43:24 PM
by 'hardware'..  I assume you mean the washer/rubber/nuts?   but the studs ARE installed in the spoiler from the factory?
Are you talking about a hunk of 1/4"-20 threaded rod, or the original double ended studs with a lag thread on one end, and 1/4-20 on the other with the integral step between them.  The ones I've seen have threaded rod only.

I don't really know what was installed in the '68 spoilers, but I'm familiar with what is in my '69 .. which is a double ended stud, with a wide flat flange in the middle (which serves as a stop when the stud is screwed into the fiberglass spoiler, and serves to prevent the fiberglass from being busted out by too much torque.).  The following photos are from my factory original rear spoiler studs and retainers (late 09C car).
1) first photo shows both  a rear (short), and front (long) stud as used on the rear spoiler (there are 4 of each, and the long ones *may* come be installed in two differing lengths, with the longer ones used on the center two locations).
2) Second photo shows the two different retainers (nuts with encapsulated washers).  The nut with the wider washer also included a 'rubber washer' which served as a seal to prevent water from entering the trunk around the stud - the rear most studs were located behind the trunk area).
3) Third photo is of one of the longer studs after removal from a spoiler.  It isn't very visible in this photo, but this stud has a wide thin flange 'stop' between the two threaded sections).
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: MyRed67 on December 04, 2013, 05:13:22 AM
by 'hardware'..  I assume you mean the washer/rubber/nuts?   but the studs ARE installed in the spoiler from the factory?

 Yes, hardware is just the nuts.  You need to install the "Gum/Caulk" yourself the kit I purchased didn't include it, but I had a whole box of it for putting car back together.  BTW, still have some leftover.  And, Yes, the studs are installed at the factory.  I was lucky enough to purchase a NOS #3916633 years ago when I knew I wanted one on the car.  You guys will probably "freak" when I share what I paid for mine back in '92,  $89,  I had a friend behind the parts counter at my local Chevy dealer.
Title: Re: 1968 Camaro rear spoiler part # (short spoiler)
Post by: rare396bronze on December 04, 2013, 05:38:31 AM
I work in gm part's  put number on gm locator monday Gm say's is disco so don't try gm dealers because we can't order it!