CRG Discussion Forum
Camaro Research Group Discussion => Restoration => Topic started by: Rufcar on April 22, 2013, 08:46:48 PM
-
Today after removing the bumper, I noticed that the License plate light was not connected to anythng? Plus its so far gone its beyond saving. Which wire in the rear harness does it get connected too?
-
What year? My 69 has a connecter that comes off of the tail light harness in the trunk
-
Jim its a 69 but I didnt see any IOll need to unwarp the tape and see if its been taped in. What color is the harnes wire that connects it? Jim
-
'69's have a connector stubbed out on the outside of the harness wrap inside the trunk - the pigtail plugs into the harness. There is a rubber grommet that seals the wire where it goes through the panel into the trunk interior - if I remember correctly, it should be part of the pigtail on the light.
Going from memory - I'll have to look at the NOS one (wherever I've hidden it).
Regards,
Steve
-
My 69 has a two wire connector as z28z11 has said. The wires into the connecter are brown and tan, also at the same point on the trunk harness a black wire comes out of the wrap to a ground screw on the lock assembly support brace.
-
I forgot to say only the brown wire coming out of the plug goes to the license plate light, the tan wire goes through a grommet over the fuel filler neck and runs to the meter in the fuel tank. Sorry its been a long Monday..............