CRG Discussion Forum
Camaro Research Group Discussion => Mild Modifications => Topic started by: greg1ontheedge on July 24, 2006, 08:02:00 PM
-
Busy freakin day at work. It's the hose running from the power brake booster to the intake manifold. The Crossram intake manifold doesn't have a recepticle for the hose so what the heck do I do with it??? Sorry, and thanks............
-
You might have to drill and tap npt threads for the fitting - assuming that there is a location on the manifold where you could do it.
-
Drill a 9/16" hole at a convenient location on the top plate (out of the way of the linkage and plumbing) and tap it 3/8" NPT for a standard manifold vacuum fitting and re-connect your booster.
-
Thanks Rich/John. Sincerely appreciate your responses and help. Is there any alternative other than putting a fitting on this thing? If at all possible, I'd really like to avoid doing that.......... Thanks again.
-
My manifold has a fitting boss in the left front corner,on the top plate. I conected both my booster and PVC there. Do you know what the casting date is on your system? Pat
-
Thanks for the suggestions. As I said, I'm really hesitatnt to drill a hole in this thing. I've attached a picture so everybody can see the manifold I'm working with. I'm thinking about trying to tap vaccuum from the carbs. I'll be running 2 Holleys with a mild cam so maybe might have enough vaccuum????