CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: Mac B on July 12, 2012, 12:10:08 PM

Title: Under Dash Wiring Clips
Post by: Mac B on July 12, 2012, 12:10:08 PM

How is under dash wiring clipped on a 69 and where do I find the clips?  Thank you for your help.

Title: Re: Under Dash Wiring Clips
Post by: JohnZ on July 12, 2012, 02:53:56 PM

Quote from: Mac B on July 12, 2012, 12:10:08 PM

How is under dash wiring clipped on a 69 and where do I find the clips?  Thank you for your help.

The dash harness routing and clipping is shown in detail in section 12 in your Assembly Manual.

Title: Re: Under Dash Wiring Clips
Post by: Mac B on July 12, 2012, 04:29:24 PM

Thanks John, do you know a source for the clips?

Title: Re: Under Dash Wiring Clips
Post by: BlackoutSteve on July 13, 2012, 07:16:05 AM

There are about two or three plastic coated metal tags that support the harness. They are simply flat metal straps that you bend to form a hook.. (see UPC12-B5-7-8) -same as what you find on the firewall.
There is also a tag that is screwed into the demister duct UPC12-B4.
And there is also two loom clips that attach to the rear of the instrument carrier shown on UPC12-B5.
Those clips are available from most electrical and Camaro parts suppliers such as these similar ones on FeeBay..
http://www.ebay.com/itm/NEW-WIRING-HARNESS-RETAINER-CLIPS-NOVA-68-69-70-71-72-73-74-75-76-77-78-79-SS-/370623590287

Title: Re: Under Dash Wiring Clips
Post by: Mac B on July 13, 2012, 11:24:53 AM

Thanks Much Steve.  I appreciate the help.

Title: Re: Under Dash Wiring Clips
Post by: 68Zproject on July 13, 2012, 05:05:32 PM

You almost had me on the demister duct.