CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: 68 TT on March 20, 2023, 08:58:23 PM

Title: 1968 1969 AIM heater housing secondary console clearance duct fasteners 9427326
Post by: 68 TT on March 20, 2023, 08:58:23 PM

I took the lower heater housing secondary duct (part # 3895932) off my 1968 Camaro 30+ years ago when I ran it as heater delete while drag racing. It is the one that redirects air around the center console. I found what looks like a similar but smaller version of it in the 1968 and 1969 AIM that I assume was the non-console version of the duct. Both AIM diagrams call for the same fasteners # 9427326 but I can't find any info on what they are. AMK shows nothing for them when I run the number.

It looks to be about the size of a #10 screw but I don't know if it uses a floating washer type or a hex washer head type. I don't want to damage this part or have it come loose using the wrong fasteners on it. Any help would be appreciated.

Title: Re: 1968 1969 AIM heater housing secondary console clearance duct fasteners 9427326
Post by: Chuck-68-Cam on March 20, 2023, 10:01:16 PM

See if this helps...

https://www.camaros.net/threads/original-hardware-see-post-2-5.321378/

Title: Re: 1968 1969 AIM heater housing secondary console clearance duct fasteners 9427326
Post by: Pacecar on March 21, 2023, 03:45:39 PM

Also check the Legends Judging Manual for photos of both console and non console duct work