CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: Chuck-68-Cam on July 03, 2022, 10:17:23 PM

Title: Temperature Sending Unit Wiring
Post by: Chuck-68-Cam on July 03, 2022, 10:17:23 PM
Hopefully someone can help me.

68 Camaro
350
TH400
Factory Gauges (Console)

I was wondering if someone would confirm that this is the temperature gauge wire location for my gauge.
Title: Re: Temperature Sending Unit Wiring
Post by: Gars68Tux on July 04, 2022, 08:27:44 AM
Yes, dark green goes to the temp. sending unit. It's shown in the AIM schematic, pg173
Title: Re: Temperature Sending Unit Wiring
Post by: Chuck-68-Cam on July 04, 2022, 12:22:51 PM
Thanks, and yea I have that book. Shitty PDF. This is what my image of harness looks like. I ordered the color schematic, but not here yet.
Title: Re: Temperature Sending Unit Wiring
Post by: Gars68Tux on July 04, 2022, 05:23:20 PM
Geez, and I thought mine (AIM)was bad. Guess I should take better care of it!
Title: Re: Temperature Sending Unit Wiring
Post by: bertfam on July 04, 2022, 05:26:35 PM
If you have factory gauges, you need to get one of THESE (https://www.ebay.com/itm/274532781338?fits=Submodel%3ARS%7CModel%3ACamaro&hash=item3feb6dcd1a:g:wZkAAOSwBLxfhhBd).

Ed
Title: Re: Temperature Sending Unit Wiring
Post by: Chuck-68-Cam on July 04, 2022, 06:06:39 PM
ED,

Does that have any more info than the other 3 I have. I have

Assembly Manual
Electrical Manual
and the 18x24 laminated color schematic (on the way)
Title: Re: Temperature Sending Unit Wiring
Post by: bertfam on July 04, 2022, 06:33:54 PM
Quote
Does that have any more info than the other 3 I have.

Yes, it includes not only the wiring diagrams, but also the RS, Console and gauge wiring diagrams including the connector types. It also includes RS door diagrams and 67 RS troubleshooting.

Ed
Title: Re: Temperature Sending Unit Wiring
Post by: Chuck-68-Cam on July 04, 2022, 06:41:34 PM
Okay, looks like I am forking out more cash...LOL

Thanks
Title: Re: Temperature Sending Unit Wiring
Post by: David K on July 04, 2022, 07:38:51 PM
Is there an issue?
Title: Re: Temperature Sending Unit Wiring
Post by: Chuck-68-Cam on July 04, 2022, 08:03:18 PM
I am installing Tic-Toc Tach, new under dash harness and console gauges. The old after market temp gage was some type of one piece from sensor to gauge. Or maybe I just not figure out how to take it apart. Anyway, I changed out the temp sender and can not fine the wire. Just needed to be sure I was looking at the correct connector. Honestly, I am this close to just buying the 2 under hood harness's and being done with it...LOL