CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: 67conv6cyl on March 27, 2019, 08:56:05 PM

Title: Standard 3 speed Saginaw
Post by: 67conv6cyl on March 27, 2019, 08:56:05 PM

Does anybody know what a standard Saginaw 3 speed floor mounted shifter factory back up switch looks like?....not the HD trans

Title: Re: Standard 3 speed Saginaw
Post by: Jek9016 on March 28, 2019, 05:02:08 PM

Not sure, but if you are experiencing trouble I switched over to an aftermarket Hurst back up light switch.  It was easy to install and works well.  I have a Saginaw 4 speed, but believe the same part will work with any hurst shifter

Title: Re: Standard 3 speed Saginaw
Post by: olddragracer on March 29, 2019, 07:16:47 PM

The Saginaw 3 speed backup light switch is the same as Saginaw and Muncie 4 speeds for 67 and 68. The bracket that mounts the switch to the side cover is different than the  Muncie 4 speed. The 1/8" rod that hooks the switch to the 1st and reverse lever is unique to the 3 speed Saginaw floor shift. I hope this info helps, I am working from memory.

Title: Re: Standard 3 speed Saginaw
Post by: 67conv6cyl on March 29, 2019, 09:15:27 PM

I am looking for a original picture if anybody has one or original part number.