CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: Dave C. on March 24, 2013, 12:48:17 AM

Title: 69 Camaro Fender C-clips
Post by: Dave C. on March 24, 2013, 12:48:17 AM

I am cleaning up some harware removed from the front end of a 69 Camaro and am not sure which hardware is correct.  It all may be correct, however somebody replaced the fenders at one time and mixed up much of the hardware on other areas of the car, so I am questioning what I have found so far.  The car is a Febuary built Norwood body.  Most of the bolts look original as many have the same markings.  I have so far found three different types of 5/16" c clips which were removed from the fenders.
(http://Desktop\Pictures\2013_3_23\69 syc fender 7.JPG)

Title: Re: 69 Camaro Fender C-clips
Post by: x77-69z28 on March 24, 2013, 03:12:48 AM

Dave, the top two rows are 69. The square ones in the third row are 67. I have never seen the last ones

Title: Re: 69 Camaro Fender C-clips
Post by: Dave C. on March 24, 2013, 10:15:08 PM

Thanks!

The bottom two are the 3/8" size I removed from the body for the lower fender mounting.