CRG Discussion Forum

Camaro Research Group Discussion => Decoding/Numbers => Topic started by: plumL78 on April 05, 2012, 05:37:12 PM

Title: ID this curve neck rad.
Post by: plumL78 on April 05, 2012, 05:37:12 PM

I picked up this rad at the Phillie muscle car parts auction earlier this week. The bars and brackets are like a  camaro bb rad. so  they can be used to build a camaro rad. I would like to know what it really is before I cut it up. The left tank is curved neck and is coded LG . The right tank is coded AF and its a 3 core rad. Thanks  Kerry

Title: Re: ID this curve neck rad.
Post by: plumL78 on April 05, 2012, 08:49:00 PM

It is a 21" not a 23" but the mounting brackets are the same as BB

Title: Re: ID this curve neck rad.
Post by: KurtS on April 09, 2012, 08:31:36 PM

I have lots of these tank codes but recognize neither of those two codes.

Title: Re: ID this curve neck rad.
Post by: mickeystoys69RSSS on April 09, 2012, 11:14:11 PM

It also looks like it is from an automatic car it has the threaded holes to screw in the auto trans cooling lines.

Title: Re: ID this curve neck rad.
Post by: plumL78 on April 10, 2012, 11:35:32 AM

I think it is a 67 rad because of the round holed 67s had in them on the upper & lower bars. like I said I bought it for the BB mounting brackets a lot cheeper than I can buy the new ones that heart beat sells.  What I find strange about it is its only a 21" BB rad. I tried over at a fire bird sight and didn't get much response there either. Thanks  again  Kerry