Messages

16

Restoration / Need paintcode for 67 CC ermine white...

« on: September 09, 2013, 11:22:58 AM »

I got a PPG Deltron paintcode from another site, but apparently does not exist anymore. Also need black code also for the stripes.

Im not necesarily going to use Deltron, but I want a BC-CC paint....  any help is appreciated.

Thanks CRG
Max

17

Trans-Am Camaros / Re: Heater delete

« on: March 19, 2013, 10:26:48 AM »

Hey Jon,

Thanks a bunch for the pics...good stuff !!! leads to a few more questions.

 So next question is what did they do on the hetaer delete cars for the firewall pad?? 
Did they have a pad that had no cutout for the heater core access?
Were heater delete plates seamsealed to make weathertight?? looks like remains of some kind of sealer on that one plate..??

thanks again !!

18

Trans-Am Camaros / Heater delete

« on: March 17, 2013, 04:47:28 PM »

Thanks Robert,

that is what I was looking for. As far as detail, I am trying where it is practical and feasable.
Although I am trying to use some parts that Ive had around for some years now for the build...as my budget is not unlimited.
But, Im sure I can source some of the correct screws.

Thanks, Max

19

Trans-Am Camaros / Heater delete

« on: March 17, 2013, 01:44:25 PM »

Hey guys, great site and pics !!!    Ive been looking at all the pics and have not found a good pic of what I was looking for. Maybe I should be asking in another thread..??    What type of fastener did they use to attach the heater delete plates?   Thanks in advance !   max

20

Originality / Need pic of 67 Z firewall

« on: December 31, 2012, 03:48:25 PM »

I beleive my 67 Z may have an extra hole or two in the firewall. There seems to be an extra 3/4" hole above where the steering column comes thru and the gas pedal linkage area...and various smaller drilled holes more near the center wire loom and heater box area. I cannot find any reference to this hole in the ass. manual. I'd like to fix whatever necessary to make it correct before paint. Only option on my car besides the standard Z stuff is the very rare shoulder belts. Also car is latest cowl tag Z known...07C car, if that matters. 

Can anyone post some clear pics of thier bare Z firewall before restoration for reference? or email to mraffaele69@yahoo.com

Thanks in advance,
and thanks CRG, Max       

Happy New Year Kurt and to everyone here at CRG

21

Decoding/Numbers / Re: Vin on euro prodused camaros

« on: December 31, 2012, 10:26:39 AM »

Why do you think the car body is an original 4-speed car? Wasn't the hole in the tunnel the same on 4-speeds and automatics in 67 Correct me if I am wrong please.

22

Decoding/Numbers / Re: 67 Z-28 CRANK

« on: January 22, 2012, 11:15:56 PM »

my NOS Smokey Yunick 67 MO 302 has the 6764 crank in it. I also have another Smokey documented 67 Z crank that has the same part number.

23

Trans-Am Camaros / Re: NOS MO302 Smokey Yunick motor started for first time ever!!

« on: December 03, 2011, 02:57:13 PM »

Hey Jon, Thanks for posting the direct links. Those vids are the first day thru a stock gardner exhaust system.

 I am going to make a few more vids before I assemble the car. I am going to put on my day-two 'drag' package with cowl plenum, factory headers and 69 chambered setup and aftermarket mags and tires . Then the day three 'TA' package with the x-ram and fib. cowl hood, TI ign.,  JL-8 service rear, minilites,  and the Stahl headers and straight exhaust out the side. I want to hear that little 302 when it is really breathing !!!  I hope to make a few cool videos soon. I'll be sure to post them here!!

I have the body in primer ready to paint, unfortunately I only get to work on the car in spurts. Very soon,  I'm hoping to put the body on the frame and do a test panel fit before I take it back apart to paint. I already have a few questions and I am sure I will have a bunch more !!!   

Thanks again for the site and all the info. as some of my questions have been answered already here !!!

max

24

Trans-Am Camaros / NOS MO302 Smokey Yunick motor started for first time ever!!

« on: December 02, 2011, 12:09:33 PM »

Hey Jon and fellow members,

I found this forum just a few months ago. Great job and keep up the good work !! I am sure I will have plenty of questions soon now that I am finally getting my car together.

Just for a little backgroud. I bought my first Camaro before I had my drivers license at 15 years old. it was a 67 RS. Me and a friend split the car and we paid 75 bucks...37.50 each !!   That was 2 weeks delivering the local newspaper for me back in them days !! haha ..Soon after, I read an article in a magazine about the elusive 67 Z. How there were only 602 made, and they had no emblems..just stripes and the drivetrain. Very soon after, I painted black stripes on our RS. We probably had the first 67 Z-28 clone ever!!...even though it was an automatic...haha

Fast forward some 35 years..I am finally bulding my real 67 Z and at last fired up the motor. It was purchased at Smokey Yunicks auction. I dont know if I can post the vid here, so here is a link to the Yenko site that has the vid.  I thought You guys would like it.

http://www.yenko.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=468006#Post468006

25

Decoding/Numbers / Re: Any 07C cars from Van Nuys?

« on: October 31, 2011, 11:54:28 PM »

so how many 07 C cars are known?  from Norwood..   assume 0 from VN? 

26

Originality / Re: camaro 68 RS from antwerpen belgium.

« on: January 25, 2009, 01:21:43 AM »

What's up with the long thin cowl tag on the other side??

27

Decoding/Numbers / Re: End of the model year

« on: March 20, 2008, 11:05:40 AM »

so what is the last Camaro known??? how far from the end??  just curious!!

28

Decoding/Numbers / 1969??? 15" x 6" DF rally wheel??? Not Z-28 or what??

« on: March 16, 2008, 10:15:34 PM »

So whats the deal here...This was in the trunk of my 67 Z since I bought it...I always assumed it was from the car originally...I finally checked the code..and the date is 69,correct??  Is this a service replacement rim??? didi they use this rim for a different application in 69??? Thanks CRG

29

Decoding/Numbers / Re: Tire date and decode help please

« on: March 16, 2008, 09:36:24 PM »

thanks john...but there is no way to pin down the date exactly?? are there other numbers??  thanks max

30

Decoding/Numbers / Tire date and decode help please

« on: March 16, 2008, 07:50:38 AM »

this is what i believe to be the original spare to my 70 Z-28...Sorry its not a 69   

but I know you guys know the most about these things!!!   thanks CRG