Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sam

Pages: [1] 2 3 ... 16
1
Originality / Re: 1969 Z/28 oil pressure line
« on: August 19, 2019, 07:28:40 PM »
Again, thank you for the input guys. Did not think GM would offer a part like that.

2
Originality / Re: 1969 Z/28 oil pressure line
« on: August 18, 2019, 03:02:27 PM »
Thoughts on this set up Warren?

3
Originality / Re: 1969 Z/28 oil pressure line
« on: August 18, 2019, 11:58:15 AM »
William, Warren, I bought my 69 Z/28 in April of 2000. The original console and gauges had been added before I bought the car. I noticed the oil pressure sending unit fitting and line with the idiot light sending unit attached to each other. Never saw that before but no big deal, it works. 19 years later I see on Ebay the "EXACT" same setup block, nipple, line fittings everything as my car has. Never saw that anywhere but on my car. Still has to be a homemade set up but.................weird.

EBAY # 333238335102

Thanks,  Sam

4
Originality / Re: 1969 Z/28 oil pressure line
« on: August 17, 2019, 05:09:31 AM »
Neither have eye but the guy on Ebay believe's it exists. Thanks for the response.

Sam

5
Originality / 1969 Z/28 oil pressure line
« on: August 16, 2019, 04:29:14 PM »
Does a 69 Z/28 with a console and gauges also get an idiot light  sending unit along with the plastic line? There is a unit on Ebay showing a copper/brass nipple with a brass block with the oil line fitting and oil sending unit as an assembly. The person said he removed it from a 69 Z/28 with console gauges where the idiot lights in dash and console gauges both worked.

Could this be something GM offered as over the counter parts to people who wanted to add a console to their camaro?

thanks for the help.

Sam

6
Originality / Re: 1969 Z/28 manual steering rag joint
« on: January 20, 2019, 10:01:16 PM »
I am Jim. That is why I want to buy the correct one. I found a couple NOS ones in the box but are slightly different. Just wanting to make sure I buy the correct "assembly line" version. Thanks for the response and the photo.

7
Originality / 1969 Z/28 manual steering rag joint
« on: January 20, 2019, 06:16:52 PM »
Do all the assembly line "manual" rag joints (#7806391) come with the ground strap? I have the original one on my 69 Z that needs to be replaced. I see some NOS ones with and some without the ground strap for sale. My Z/28 is an 11D of 68 car if that matters.

Thanks,  Sam

8
Originality / Re: Original Battery Hold Down Clamp
« on: May 15, 2012, 01:36:09 AM »
I have the original on my 69 Z/28 that I painted and also have the original  one on my 69 "survivor" SS nova that has the rubber based paint on it. I bet they were dipped some how to help with the battery acid.

9
Originality / Re: 1969 camaro endura bumper jack
« on: May 12, 2012, 04:52:52 PM »
Thanks Joe.  Sam

10
Originality / 1969 camaro endura bumper jack
« on: May 12, 2012, 02:35:02 AM »
Other than the VE3 load rest is any other part of the jack painted blue?  Thanks!

11
Decoding/Numbers / Re: 69 Z/28 firewall crayon marks
« on: April 15, 2012, 03:45:20 AM »
I have an 11D Z/28 and my bulkhead reads DG3. I have a dark green interior and an X33 car.

12
Decoding/Numbers / Re: 67 Z-28 CRANK
« on: February 03, 2012, 12:11:27 AM »
a steel 283 crank will also work.

13
I believe the 69 Z/28 frame mounts should have 507 and 508 as a part number on them.

14
Originality / Re: Original finish on a fan spacer
« on: December 05, 2011, 02:19:23 AM »
I believe natural finish.

15
not sure it is worth all your time, money and effort. Its pretty bad in my opinion but???????

Pages: [1] 2 3 ... 16
anything