CRG Discussion Forum
Camaro Research Group Discussion => Decoding/Numbers => Topic started by: jbtech on March 30, 2022, 04:19:58 PM
-
I'm in the process of having every decal/tag reproduced for my car but the decal maker does not have much to go on for 67's.
He has asked me for the following so he can reproduce what I need.
Codes, Part Numbers, and Colors, and reference photos
I attached my window sticker to help with this process. Luckily my original tire pressure sticker is still in the car.
If you can help me with this I'd greatly appreciate it!
Needed list I can think of:
Booster Tag
Jack Instructions
Front and Rear Spring Tags
Disc brake backing plate decals
Shock Decals
others?
Thank You!
Jose
-
I'd contact Don Lightfoot (sedanss69@hotmail.com) and put your request in. He does awfully good reproductions, dead on, just sent me the emission decals for my '69 Z and '69 SS, plus a repro dash cluster tag for my '67 SS I asked him to reproduce. Perfect work - he's helped quite a few of the CRG and Corvette guys.
Regards,
Steve
-
I'd contact Don Lightfoot (sedanss69@hotmail.com) and put your request in. He does awfully good reproductions, dead on, just sent me the emission decals for my '69 Z and '69 SS, plus a repro dash cluster tag for my '67 SS I asked him to reproduce. Perfect work - he's helped quite a few of the CRG and Corvette guys.
Regards,
Steve
Steve thank you. Don is who I'm in contact with. He is limited on example decals for 67's. Thus, I'm posting here to gather the data that will benefit me and perhaps future customers of his.
Jose
-
Jose,
I didn't see the date on the window sticker and the assembly date wasn't mentioned in your post. Your trim tag on the driver's side firewall will help you with this. There were at least two different jacking instruction versions for your 67 coupe, one with a screwdriver pictured and one without, depending on when your car was assembled by the factory:
- 3909124 (9-7-66): Screwdriver pictured. Photo of an original attached. I forgot where I got the photo from (most likely a CRG post), so my apologies for no photo credit.
- 3909124 (1-10-67): No screwdriver pictured. See photo of an original in Reply #58 to http://www.camaros.org/forum/index.php?topic=8891.msg62391#msg62391.
Good luck finding the correct Irwin screwdriver if your car required one...unobtainium! For more info on the Irwin screwdriver (P/N 3855238), see http://www.camaros.org/forum/index.php?topic=18873.0;all.
Bernie
-
Being a L78 it was produced after March thus it would have the NON screwdriver decal.
although it does not apply here -FWIW -The screwdriver is the same one which came with 67 Corvettes with the aluminum wheel option.
Rumor has it people have paid 3k to 5k for the screwdriver.
-
Thank you all for the help. My car is a 4th Week of April build. What 2 letter callout code would be the front and rear springs? Colors?
Thanks!
-
I am pretty sure 67 REAR springs were color coded with a stripe which went around the eye on the front of the leaf.
-
To those attending nationals please spam my phone full of '67 L78 photos, detail shots, anything cool please! 408.859.9429
Thank You!
Jose