CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: x66 714 on March 14, 2024, 01:15:42 AM

Title: Wire information about a power window or power top car
Post by: x66 714 on March 14, 2024, 01:15:42 AM
I have a friend installing power windows in his 69 coupe. There's a wire with a grommet that comes from the inside of the car, through the firewall & goes to the circuit breaker. I went though the AIMs book but couldn't come up with a definitive answer as to where that hole needs to be. Even the chart doesn't show that hole. Power top should have the same hole. It should be 1/2". Can anybody help please & tell me the location of that hole? Thank you, Joe
Title: Re: Wire information about a power window or power top car
Post by: x66 714 on March 15, 2024, 12:12:09 AM
I found my answer. Thanks to all that read my post.....Joe
Title: Re: Wire information about a power window or power top car
Post by: CantRepeat on March 16, 2024, 11:49:32 AM
I found my answer. Thanks to all that read my post.....Joe

What was the answer?
Title: Re: Wire information about a power window or power top car
Post by: x66 714 on March 16, 2024, 02:20:01 PM
Passenger side of the fuse box, there is a dimple. I believe the hole size is 1/2". Hole was done by Fisher. That's why it's not in the AIMs book...Joe
Title: Re: Wire information about a power window or power top car
Post by: fsc66 on March 17, 2024, 01:40:13 PM
There is most likely a rubber grommet that the wire runs through that mounts on the fire wall also
Title: Re: Wire information about a power window or power top car
Post by: x66 714 on March 17, 2024, 03:36:29 PM
There is most likely a rubber grommet that the wire runs through that mounts on the fire wall also

There is. It's part of the harness.....Joe
Title: Re: Wire information about a power window or power top car
Post by: David K on March 17, 2024, 06:47:40 PM
Do we not get a picture of the dimple?
Title: Re: Wire information about a power window or power top car
Post by: x66 714 on March 17, 2024, 07:00:36 PM
Here you go....Joe