CRG Discussion Forum

Camaro Research Group Discussion => General Discussion => Topic started by: 67conv6cyl on September 24, 2022, 10:31:03 PM

Title: Wiper arms
Post by: 67conv6cyl on September 24, 2022, 10:31:03 PM: Dose anyone know the correct part numbers for convertible wiper arms.
I have a parts book however no part numbers on this item.

I just want to see if my 67 wiper arms are the correct originals.
Title: Re: Wiper arms
Post by: 67conv6cyl on September 24, 2022, 10:40:59 PM: Here is a. Picture of my wiper arm
Title: Re: Wiper arms
Post by: Petes L48 on September 25, 2022, 01:42:51 AM: It's UPC 1 Sheet A3 in the AIM.

3916687, or 3916688 is the optional for a vert. I assume the Trico was primary and Anco was the optional

FWIW I also saw 3893839 Trico listed in a 1966 parts book.
Title: Re: Wiper arms
Post by: rare396bronze on September 25, 2022, 02:44:20 AM: 1969 Chevrolet parts book says 3916688 trico 67-68 camaro convertible! Hope this helps. They are shorter than the coupe!
Title: Re: Wiper arms
Post by: 67conv6cyl on September 25, 2022, 07:16:45 PM: So the wiper arm I posted is not correct for a 67 convertible?
Title: Re: Wiper arms
Post by: rare396bronze on September 25, 2022, 07:27:25 PM: I would take measurement of the arm and post it in a picture off it. I don't think the the gm part is stamped on the arm!
Title: Re: Wiper arms
Post by: Petes L48 on September 25, 2022, 07:51:42 PM: Your picture showed Patent numbers, not part numbers. I don't recall the part number being stamped or cast on the arms either.
Title: Re: Wiper arms
Post by: 67conv6cyl on September 26, 2022, 02:07:01 AM: Hear is picture of the complete arm
Title: Re: Wiper arms
Post by: rare396bronze on September 26, 2022, 03:14:18 AM: Looks right just checked my convertible. With my blade off 13 1/4 long fully pushed down. All the numbers on the arm matches mine.
Title: Re: Wiper arms
Post by: 169INDY on September 26, 2022, 03:23:18 AM: Are all of the Short Arms stamped "CONV" ??
My 69's are.

Jim
Title: Re: Wiper arms
Post by: dannystarr on September 27, 2022, 04:17:35 AM: I know the convertible arm is 1" shorter than hard top. At least in '67 & '68. Danny
Title: Re: Wiper arms
Post by: Sauron327 on September 27, 2022, 02:38:20 PM: Quote from: dannystarr on September 27, 2022, 04:17:35 AM
I know the convertible arm is 1" shorter than hard top. At least in '67 & '68. Danny
69 too. Restored all three years and sold off all my convertible wiper arm stock. Ready to scrap my hardtop ones. Tired of saving inventory.
Title: Re: Wiper arms
Post by: rare396bronze on September 27, 2022, 02:49:40 PM: Don't see conv stamped on my 68 arms or a spare set i have. Only thing stamped on them is what is pictured on 67conv6cyl!
Title: Re: Wiper arms
Post by: Pacecar on September 27, 2022, 02:56:31 PM: 67 Arms should be brighter than 68 and 69, noticeable at the knuckle
Title: Re: Wiper arms
Post by: Petes L48 on September 27, 2022, 06:27:11 PM: Didn't see a CONV on my 67 arms either, but was using a flashlight and small mirror, while staying away from the paint.
Title: Re: Wiper arms
Post by: 67conv6cyl on September 28, 2022, 11:06:51 PM: Quote from: Pacecar on September 27, 2022, 02:56:31 PM
67 Arms should be brighter than 68 and 69, noticeable at the knuckle

The knuckle is brighter chrome on the ones that I have….however I don’t see a convertible stamp anywhere. These were on my 67 when I bought car over 30 years ago.