CRG Discussion Forum
Camaro Research Group Discussion => Decoding/Numbers => Topic started by: HustleRussell on July 07, 2023, 07:38:44 PM
-
1969 SS 02D 124379N610048.
-
More
-
More
-
More
-
Looks ok to me but what do I know. Answer - Not much.8)
-
Howdy y'all. I'm sorry should have included link to rear axle stamp from a few years ago.
http://www.camaros.org/forum/index.php?topic=13958.msg121326#msg121326
-
Transmission stamp.
http://www.camaros.org/forum/index.php?topic=15111.msg134671#msg134671
-
Now I am starting to see something interesting here. HA but was a HD 3spd? Lets get all the photos into one thread so its easier to follow.. Do you still have the original intake, carb etc?
124379N610048
(http://www.camaros.org/forum/index.php?action=dlattach;topic=15111.0;attach=20282;image)
(http://www.camaros.org/forum/index.php?action=dlattach;topic=13958.0;attach=18243;image)
(http://www.camaros.org/forum/index.php?action=dlattach;topic=15111.0;attach=20283;image)
(http://www.camaros.org/forum/index.php?action=dlattach;topic=15111.0;attach=20285;image)
(http://www.camaros.org/forum/index.php?action=dlattach;topic=15111.0;attach=20287;image)
(http://www.camaros.org/forum/index.php?action=dlattach;topic=13958.0;attach=18244;image)
-
Everything relative to the stampings seems fine to me.
-
I wasn't inferring that there was anything wrong. But to see a HD 3spd L48 SS is rare.
-
I wasn't inferring that there was anything wrong. But to see a HD 3spd L48 SS is rare.
Yeah, 3079 of them. Included with SS. Pretty rare because undesirable. Is this a low option SS?
-
Thanks for the comments. I still have the original intake, bellhousing and oil pan.
Exhaust manifolds, heads and carburetor long gone.
Z21 is the only option to be sure of. When I purchased it in 1995 it had the
rear bumperettes and all the signs of Z23 special interior. No other options
that I’m aware of.
-
It probably had "041" heads on it originally. Should not be too difficult to find some. Carb is a lot harder to find and if you do find one it would not be cheap.
-
Thanks for the info stingr69. I forgot about the distributor. This one came with the car. Could it be original?
-
Distributor stamping is December 20th of '68 350/300 with manual transmission.... Looks good to me.
-
Thanks again Stingr69. What date range should I be looking for on cylinder heads?
-
Anything before February 26th '69 would work.
-
Okay thanks again. Here’s the intake.
-
Hard to tell but date looks to be B 6 9.
-
I think B 5 9 with my glasses on
-
You are correct. I missed it.